Pet Snake Forum And Discussion Board

  #1  
Old 11-21-2011, 08:03 AM
Thom's Avatar
Thom Thom is offline
Senior Member
 
Join Date: Feb 2008
Location: Findlay Ohio
Posts: 280
Default Building a new VIV

Ok I have found all of my old pics from when I built Hawn's viv and the chamber to euthanize her prey. I was going to go ahead and post all of them and maybe it will help anyone else. If you want to see the pics here just let me know and over the next cpl of days I will get it al setup.
BOATIPS.COM ROCKS!
__________________
Thom & Jen H.

1 Albino Burmese Python ( Hawn )
1 Bull Terrier Boxer Mix ( Diego )
1 Columbian Redtail Boa
Reply With Quote
  #2  
Old 11-21-2011, 08:30 AM
Greg Nel Greg Nel is offline
Senior Member
 
Join Date: Jul 2011
Location: Mthatha, Eastern Cape, South Africa
Posts: 270
Default

Thom please go ahead and post the pictures and info as i am keen to build new vivs for my bigger snakes. I also am desperate to avoid escapes as my design leaves a bit to be desired regarding security features.
__________________
1.2 Red-tail boas (Castro + Cheeky + Sally)
1.1 Ball pythons (Pablo + Che')
0.1 Dumeril's boa (Alegra)
1.0 African Grey Parrot (Waxy)
1.3 Dogs (Marley, Jemma, Chelsea and Sasha)
Reply With Quote
  #3  
Old 11-21-2011, 01:05 PM
Thom's Avatar
Thom Thom is offline
Senior Member
 
Join Date: Feb 2008
Location: Findlay Ohio
Posts: 280
Default

Ok its been a long time since I have tried to post anything of length on here so I am going to start out by HOW TO BUILD A GAS CHAMBER. I know it sounds a lot more diabolical then it really is...
First I want to begin by saying that I do not nor will I ever again feed any of my snakes live prey. I have not only seen way too many pics of snakes that have been killed by a tiny little mouse cuz the snake wasnt hungry when it was fed so that gave the mouse the opportunity to bite the snake or even eat the snake. I had that happen to me about 25 years ago with a small redtail boa we had.
Now you might ask.... Why not buy frozen, they are a lot cheaper and safer. My answer to that question is this..... When you go to the store and buy a nice t-bone, do you buy it frozen? No you dont. You buy it fresh and eat it while it is still fresh. Also to add to my reasoning... I have no idea how long ago that rat was frozen and if it was healthy when it was frozen. Now I have been told over and over again that the freezing process would take care of anything that the rat might have had that would harm my snake but again I say poppy****!
Therefore I always buy live rats and I keep them for at least 24 hours before I euthanize them in my gas chamber to make sure they arent sick.
Now your next question is I'm sure... Why not just bash the rat or daze the rat or whatever else you might come up with to kill it. My answer to that is.... Why? The poor rat is already giving his life for my babies why make him suffer anymore then it has to. After building the chamber the cost is a fraction of a cent to use. I just filled up my Co2 bottle Fri after I used it for 4 years! Thats right I said 4 years. It cost me less then $5.50 USD to fill the bottle and it took me over 4 years actually to empty it.
__________________
Thom & Jen H.

1 Albino Burmese Python ( Hawn )
1 Bull Terrier Boxer Mix ( Diego )
1 Columbian Redtail Boa
Reply With Quote
  #4  
Old 11-21-2011, 01:16 PM
Thom's Avatar
Thom Thom is offline
Senior Member
 
Join Date: Feb 2008
Location: Findlay Ohio
Posts: 280
Default Gas Chamber cont...


This is a pic of the main things you will need. They include....
1 Co2 bottle. I use the 20 oz. Paintball gun bottle
1 10' section of aquarium plastic air hose
1 Seal-able container that will be big enough to hold the prey
1 One container without a lid. I use an ice cream bucket
1 adapter with a shut off to hookup the bottle to the chamber
Now you can see in the pic that there are few other things but this list is the main stuff you will need. I will ge to the other stuff shortly
__________________
Thom & Jen H.

1 Albino Burmese Python ( Hawn )
1 Bull Terrier Boxer Mix ( Diego )
1 Columbian Redtail Boa
Reply With Quote
  #5  
Old 11-21-2011, 01:21 PM
Thom's Avatar
Thom Thom is offline
Senior Member
 
Join Date: Feb 2008
Location: Findlay Ohio
Posts: 280
Default


You will need to drill a hole in the removable lid for your chamber so that you can put a hose fitting in the lids. the air hose attaches to this fitting just by pressing it on. There is no reason to clamp the hose on. If you get the proper size fitting for the hose it will work just fine and not have any leaks.
Now to conect the fitting to the lid I just used a nut on the back side of the fitting with a washer so I could tighten ot down as tight as I could get it.
(Sorry the pis is so blurry but its the only pic I have of this step and hopefully it at least shows you what I am talking about here)Oh and by the way in this pic you see I used a clamp on the hose so it wouldnt come lose but I found after having to take the clamp off every time I put the chamber away I didnt need the clamp at all. It works great without it
__________________
Thom & Jen H.

1 Albino Burmese Python ( Hawn )
1 Bull Terrier Boxer Mix ( Diego )
1 Columbian Redtail Boa
Reply With Quote
  #6  
Old 11-21-2011, 01:31 PM
Thom's Avatar
Thom Thom is offline
Senior Member
 
Join Date: Feb 2008
Location: Findlay Ohio
Posts: 280
Default


The next step it to drill a hole in the lowesy portion of the chamber as possible but make sure you have it high enough to fit the nut on the back side so you can tighten it. This hole is for the quick connect fitting that will fit the flex hose adaptor that you got when you bought your tank. Its the curly hose with the shutoff on it....
__________________
Thom & Jen H.

1 Albino Burmese Python ( Hawn )
1 Bull Terrier Boxer Mix ( Diego )
1 Columbian Redtail Boa
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 10:37 PM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.